|
|
THE
TIGER'S GROWING TALE
Tiger
Optics presents a significant advance for trace measurement in UHP inert,
toxic, and corrosive gases. Based on Cavity Ring-Down Spectroscopy (CRDS),
the LaserTrace is the first multi-species, multi-point, multi-gas
analyzer. Its split-architecture design offers versatility not found in
other devices.
By
using fiber optic connections to link the control module with multiple
sensor modules, the LaserTrace can save space and cost, while providing
multi-point measurements. Plus, our dedicated sensor modules guarantee
continuous monitoring of up to four sample streams. Designed by experienced
instrument engineers familiar with your applications, the LaserTrace
offers state-of-the-art detection in milliseconds, with absolute accuracy
on an array of species, including H2O, CH4, CO,
CO2, NH3, and HF. Up to four sensor modules fit
in a 19" rack-mount, or as an alternative, you can situate them individually,
and remotely as far as 200 feet away from the computerized control unit.
With
its corrosion-resistant flow system, robust design, flexible software,
touch screen and advanced sensing system, the LaserTrace lends itself
to numerous applications, from gas cylinder filling to on-line bulk gas
analysis. It affords a wide range of detections, from 200 parts-per-trillion
(ppt) to 0.1 percent, depending on the target analyte. Moreover, it has
virtually no moving parts or consumables and never needs calibration.
In fact, the instrument can self-verify its accuracy in just minutes with
a built-in "zero-check." In sum, the LaserTrace delivers:
Sensing of up to four different species, at four different points,
on four different gases
Understandable gas data and trending
Sensitivity as low as 100 ppt with very high accuracy
LDL as low as 200 ppt LDL
Freedom from calibration, with user-set performance verification
Very wide dynamic range
Rapid response
Accelerated clean-up time with upset recovery from ppm levels in minutes.
Your
LaserTrace works right out of the box, with no field calibration
or factory support required.
|