Serani
Analyzer Interface Software
Goodbye, HyperTerminal!
Tiger Optics’ Serani™ Analyzer Interface Software offers users a new way to access their analyzer remotely from any computer or laptop. The Windows-based software package communicates with the analyzer through RS-232 or Ethernet and allows full control of the system from your desk. Additional features allow data collection on your computer, advanced graphing and data analysis capabilities, as well as shortcuts to important service functions.
Serani features in detail:
- Monitoring and control of your Tiger analyzer remotely with dedicated application software installed on your computer or laptop
- Data plotting and analysis in real-time with the click of a button
- Continuous logging of concentration data
- Easy change of analyzer settings, such as gas type and data filter
- One-step data collection for “Performance Verification” and other service function short-cuts
- Compatible with Windows XP, 7, 8 and 10
- Compatible with most HALO, Spark, Tiger-i, CO-rekt and ALOHA H2O series analyzer (see below for full list)
- Analyzer firmware version 5.0.0 or higher recommended for full functionality (see Brochure for available features)
Distribution and Licensing
The latest version of the Serani software package is available to download under the Brochures & Resources tab. Use of the software requires a license key, which must be purchased from Tiger Optics or an authorized representative and is tied to a specific analyzer. For more information on software licenses and pricing, or to request a demo version, please contact us. Serani V1.2.8 was released on February 4th, 2020.
List of Compatible Tiger Optics Analyzers
| Analyzer Series/Family | Compatible Models |
|---|---|
| HALO | HALO • HALO+ • HALO 3/3Q* • HALO KA* • HALO LP HALO LP/RP/QRP* • HALO OK* • HALO H2 |
| Spark | Spark • Spark+ |
| Tiger-i | Tiger-i 2000 • Tiger-i CEM |
| CO-rekt | CO-rekt† |
| ALOHA H2O | ALOHA H2O • ALOHA+ H2O |
*Compatible only with analyzers that DO NOT HAVE a front USB port; see Serani Max for all analyzer WITH front USB port
†Due to limited access to the RS-232 and Ethernet ports in the NEMA enclosure, the CO-rekt can only be connected to the Serani in a service situation (with open enclosure).
If you're upgrading from a version of Serani 1.0.8 or older, you will need to re-enter your license key after installing the new software version.